Posts by thilor

    For example when the Bulb RGBW is in color mode, it can't switch to white mode from a HTTP command I use manually in a webbrowser or via Shelly Motion...

    Command :
    http://[ipaddress]/white/0?mode=white&turn=on&brightness=50&temp=3000

    Result :


    Code
    {"ison":true,"source":"http","has_timer":false,"timer_started":0,"timer_duration":0,"timer_remaining":0,"mode":"color","red":255,"green":0,"blue":0,"white":0,"gain":90,"temp":3000,"brightness":50,"effect":0}


    So the command doesn't return any error but doesn't change to white mode as requested.


    Anyone has an idea? Is the http req invalid?


    Haven't reset the bulb yet... ;(

    Giving this topic a bump, I would like to turn off or on two channels on a Shelly2.5 but can't seem to make it work. I'm using a Shelly Motion to turn off lights when no movement is detected, or also a button to turn off all lights when long pressed...

    http://[ipaddress]/relay/0?turn=[command]&1?turn=[command]


    http://[ipaddress]/relay/0?turn=[command]&relay/1?turn=[command]


    Neither works, is it even possible?