I think not. You have 3x230V in/3x230V+120V out 3L/3L+N, and you can use N out only for Shelly supply.
Note: you can make this with 3, 230/230 transformers...
Du besitzt noch keinen Account? Dann registriere dich einmalig und völlig kostenlos und nutze unser breites Spektrum an Themengebieten, Features und tollen Möglichkeiten. Als registriertes Mitglied auf unserer Seite kannst du alle Funktionen nutzen um aktiv am Community-Leben teilnehmen. Schreibe Beiträge, eröffne Themen, lade deine Bilder hoch, stelle deine Videos online, unterhalte dich mit anderen Mitgliedern und helfe uns unser Projekt stetig zu verbessern und gemeinsam zu wachsen! Also worauf wartest du noch? Werde noch heute ein Teil von uns!
I think not. You have 3x230V in/3x230V+120V out 3L/3L+N, and you can use N out only for Shelly supply.
Note: you can make this with 3, 230/230 transformers...
Absolutely right!, sorry.
Then you can made the same but with star/star...
ok, one possibility is putting Shelly1 in ceiling rose and make this conexions in this junctions:
brown from switch1: remove from the actual terminal strip, and connect to Shelly1-L
New wires:
- from Shelly1-0 to brown wires terminal strip
- N to Shelly1-N
- L to Shelly1-L, and Shelly1-I
Remember setting shelly1 button type to "Edge Switch"
Note: I recommend that you use reusable terminal blocks
Good luck!.
I suppose you have 3x220V. Then, I think you can connect N, Va, Vb, and Vc, using a small (25 - 50VA max) 1:1 transformer Delta to Star. In the secondary you will have the same 3 phases that you have in primary plus N.
Good luck.
Can I use the "separate switch" mode to make a scene on the device itself?
My "when" scene don't work.
When I turn On switch, I see in APP that the stick of the button symbol go blue, I waiting for 1, 2,... minuts but nothing happen.
Concretely I use this to control delayed and timer shelly relay in manual mode, because I also control it with " Weekly schedule".
Thanks for your help.
I control a little pump with a Selly1PM. In normal work it make around 700W, off no water the power down to 200W.
I want to protect pump (stop it) when it work off no water. Wonderfull iff it send a message!.
I dont found the way with scenes, neyther with DDD!!! (The only tools I know)
Some master know how?
Thanks.
Thanks #MIHO, although not being able to access that history is a shame.
Perhaps it would be a good configuration option to enable a private place in the user's cloud to store these records.
Hi all,
I don't find information about "event log" file. I see in Shelly app only some ones, but don't know how much registers are availables, and if it's posible to download this file.
Someone can help mi?
Thanks in advance.
I think a possible solution is wiring shelly2.5 as a key switch. But first you need to know if controller board has accesible negative and positive 30V dc. You also need a voltage test (from negative) on the yellow/green wire from the key switch. With that I can try to make a wiring diagram.
Good luck
Absolutely correct!
With this device, the power consumption bypasses Shelly.
For a possible solution (?): I don't know if it is possible to parallel Shelly's four outputs (R / G / B / W), use it as a blank, and use all four channels together in a group (?).
I think it's a problem if you manage any of the four channels independently, and I don't know what can happen.