Hi,
könnte man nicht zwischen L' vom PIR und Shelly SW ein Grundlastelement z.B. von Eltako setzen um inkompatible PIRs lauffähig zu bekommen?
Shelly1 - compatible PIR sensors
- d1esel
- Thread is marked as Resolved.
-
-
Hallo zusammen,
ich habe auch ein Thema: ich verwende den Bioledex Mini BWM.
Ohne den Shelly1 schaltet er sauber, aber am Shelly1 (ich nutze nur den Schalter-Anschluss) verbleiben 50 bis 80V Restspannung.
ein paralleler Widerstand als Grundlast (z.B. 80kOhm) macht leider keinen Unterschied.
mein nächster Schritt wäre, einen anderen Shelly zu probieren?
Hat jemand noch einen Tipp?
-
ein Finder Relais, da der Bewegungsmelder wohl inkompatibel (geworden) ist.
-
ein Finder Relais, da der Bewegungsmelder wohl inkompatibel (geworden) ist.
Mist...das hatte ich befürchtet. Ich wollte alles in einer UP Dose unterbekommen. Dann nehme ich wohl einen anderen BWM....oder funktioniert es mit einem Shelly2.5 vielleicht besser?
-
wenn er inkompatibel geworden ist funktioniert er höchstens am i3.
Aber wenn es so sein sollte wäre es doof, oder du hast ein anderes Modell im Vergleich zu dem genannten am Anfang.
-
Ich hab nochmal geprüft, es scheint tatsächlich ein leicht verändertes Modell. Es hat Potis statt Dips. Sieht ansonsten identisch aus.
Dann probiere ich einen alternativen BWM und teste den vorhandenen demnächst an einem i3.
Danke!
-
Moin, habe leider keinen kompatible HF-BWM gefunden - kann das sein? Muss den BWM komplett unsichtbar machen sonst dreht meine Frau am Rad. Da hilft dann wohl nur Radar. Aber ohne Relais oder ähnliches Zusatzgedöns finde ich keine HF-BWM
-
Hi all,
I'm trying to use the next PIR sensor, but it doesn't work together with the Shelly Without Shelly, PIR sensor directly connected at the LED light, it works perfect.
When I attach the PIR sensor (yellow) to the SW1 input of the Shelly it doesn't work like a switch. Does somebody knows why?
Dimmer:
https://nl.aliexpress.com/item…042311.0.0.91f84c4d7H447C
-
Because it haven't a relay.
It is using a Diode
-
I am using this sensors with Shellies, but in parallel.
Either the installed wall switches are activating the light via SW input of Shelly, or the installed Sensor which is connected to the lead which is going from O of Shelly to the Lamp.
As I never found a device of similar size which is working with Shelly, I learned to life with this arrangement.
-
I am using this sensors with Shellies, but in parallel.
Either the installed wall switches are activating the light via SW input of Shelly, or the installed Sensor which is connected to the lead which is going from O of Shelly to the Lamp.
As I never found a device of similar size which is working with Shelly, I learned to life with this arrangement.
Aaah, and it that way the lamp will be activated by the sensor, but:
- not visible in the shelly?
- So auto off can't be used/changed?
- And it isn't possible to set the dimming percentage?
But you can also activate the light through the switch and shelly? Am I right?
-
Correct, yes.
-
Today I tried different sensors with the Shelly DIMMER 2, but none of these works:
- Goobay 96006
- Orno presence sensor OR-CR-235
- Huber motion 50 HF
None of these work.. I tried everything;
- changed the DIMMER 2 for another
- used a normal pulse switch (works well)
- add the light directly on the sensors (works well)
- Set different Button types (but Activation switch should it be..)(none of these works)
but if I connect it to the SW1 of the DIMMER 2, it doesn't switch the shelly.
See image for the scheme I used.
Why isn't it working?
EDIT; just some, some, sometimes the sensor triggers the shelly. But mainly you here the relais in the sensor switching but nothing happens at the DIMMER 2
EDIT2; Add the scheme I used for the Huber sensor
-
because your pir is inkompatibel.
Use an relay and it will work.
-
Are these sensors also without relay? What is it then that I hear 'clicking'..
Ok, I see in the start post the Huber 50 HF listed, nevertheless the Goobay 96006 looks exactly as the other compatible mini sensors.
-
they can have a relay and still be incompatible. It is possible that it looks the same but that the pcb is structured differently and is therefore incompatible. You need a motion detector that really switches 100% free.
-
Because it haven't a relay.
It is using a Diode
Seb, Can you elaborate on this?
How is a diode used in switching a load?
Also:
they can have a relay and still be incompatible.
How can a mechanical relay make it incompatible with Shelly switch input .
Is there a reference on SW input requirements?
-
Tut mir leid erklären kann ich es nicht, hatte mir den nur angeschaut und bilder gesehen.
Weil du ein Bewegungsmelder brauchst der Potential frei schaltet, manche haben Schutz Mechanismen verbaut, die leiten Spannungsspitzen ab.
I'm sorry I can't explain it, just looked at it and seen pictures.
Because you need a motion detector that switches the potential freely, some have built-in protective mechanisms that divert voltage peaks.
-
Hallo!
Hat jemand bereits den Steinel IS 3180 getestet und ist dieser mit der Shelly kompatibel?
67102_Datenblatt - 4007841009113 - BEWEGUNGSMELDER IS 3180-E COM1 AP WS.pdf (steinel.de)
-
i tried this evening also the Sebson PIR, which is on the compatible list of the first post. But it isn't working on the Dimmer 2!
SEBSON - MINI INFRAROT BEWEGUNGSMELDER UNTERPUTZ (nur mit RGBW2! 230VAC)
I used my previous schematic.
The lamp can be normal controlled by the shelly. And the lamp is also working directly at the pir. But when i connect the pir to the Dommer 2 it isn't working! How can this?
