Shelly 1 inverted behavior

Lass dich durch uns Informieren
Wir Informieren dich über neuigkeiten und Angebote von Allterco.
Melde dich beim Newsletter an !
Diesen findest du rechts in der Menueleiste ganz unten.
  • Hello,

    we have a device with a 12V controller.

    The controller has 2 contacts (normally open).

    If the contacts are open, the device is enabled (ON).

    If the contacts are closed, the device is disabled (OFF).

    If I use Shelly 1 to open / close the contact, it works, but:

    - when I see ON in the App, our device is OFF because the contacts are closed;

    - when I see OFF in the App, our device is ON because the contacts are open.

    Is there any tricky to invert this behaviour in the App?

    Thank you

  • Hello mirko.cola, welcome to the forum. 😊👋

    Reverse input under Buttontype might solve your problem.😉


    LG Michael

    Einsteigertipps / Tips for beginners

    Meine Shellys:

    In Betrieb: 3x Shelly Dimmer, 3x Shelly 1, 2x Shelly 1PM, 2x Shelly 2.5, 1x Shelly RGBW2, 1x Shelly 4Pro, 4x Shelly H&T, 1x Shelly Sense, 10x Shelly Plug S, 2x Shelly Plug, 3x Shelly Smoke V1, 1x Shelly EM, 1x Shelly Flood, 3x Shelly Duo GU10, 2x Shelly Vintage, Shelly Duo, 1x Shelly Eye, 2x Shelly Door/Window, Shelly Button, Shelly Button 1

    Testboard mit Shelly Dimmer, Shelly 2.5, Shelly RGBW2, Shelly 1, Shelly 1Pm, Shelly i3, Shelly Temp Add-On mit DHT22 und DS18B20

    Noch nicht verbaut: Shelly 3EM, Shelly Dimmer 2, Shelly Door/Window 2, Shelly GAS, Shelly i3,

    Kein übergeordnete System. Nur App und WebUI mit Cloudverbindung.:)

  • Hi, thank you for your answer.

    I have tried, but it is the same.

    I think the "Button Type" settings in the App are related to the button connected to SW contact of Shelly.
    I have connected only I and O, there is nothing on SW.